Thursday, November 24, 2011

Impeller Logs and Compasses

!: Impeller Logs and Compasses

Sailing and navigation...Measuring Direction and Distance

For Measuring distance at sea, the old type of log that gave us the knot as unit of speed has long since given way to more sophisticated mechanical and electronic devices.

Walker logs

One of the oldest is the Walker log. This uses a torpedo-shaped spinner a few inches long towed behind the boat on a length of braided line. As it moves through the water, spiral fins on the torpedo make it spin, twisting the line. The on-board end of the line is hooked on to the back of the log instrument, where it turns a shaft connected to a reduction gear box. This in turn moves the hands on a series of dials, rather like those of an old fashioned gas meter, to give Direct reading of the distance the spinner has moved through the water.

Advantages of the Walker log are its rugged simplicity and the ease with which weed or debris can be cleared from the pinner. Its disadvantages are that its display has to be mounted right at the back of the boat; that the log line (usually 30 or 60 feet in length) has to be streamed before the log can be used, and recovered before entering harbour; it tends to under-read at very low speeds; and at speeds over about ten knots the spinner is inclined to jump out of the water and skitter along the surface. There are definite techniques for streaming and recovering a mechanical trailing log, intended to reduce the risk of the line tangling. To stream the log, first attach the on-board end to the hook on the back of the display unit. Then, keeping the spinner in hand, feed out all the line to form a long U-shaped loop astern before dropping the spinner overboard, well off to one side of the loop. Some owners like to hold on to the line just astern of the display unit for a few seconds, just to absorb the snatch as the load comes on to the line.

When recovering the log, speed is essential, especially if the boat is moving fast. Unclip the inboard end from the hook on the back of the display, and drop it overboard, allowing it to trail out astern while you pull in the log line. Then holding the spinner, gather in the line, coiling it as you go. Trailing the line astern like this allows any kinks to unravel.

Electrical trailing logs

The electrical trailing log is superficially similar to a Walker log, inasmuch as it uses a spinner towed astern of the boat on a long line. In this case, however, the spinner is in two parts, and the 'log line' is an electrical cable. The front part of the spinner is attached to the cable and only the rear part is free to rotate. As it does so, an electronic sensor in the front part makes and breaks an electrical circuit, so the on-board display unit receives a short pulse of electricity each time the spinner rotates. These pulses are counted electronically and are presented as a digital display of speed and distance run.

The advantages and disadvantages of this type of log are much the same as for the mechanical Walker log except that it is dependent on electrical power from internal dry batteries, which in return allows the display unit to be mounted almost anywhere on board, and that because the line itself is not twisting, it is rather easier to stream and recover.

Hull-mounted impeller logs

On cruising boats, hull-mounted logs are by far the most popular type, though in principle they are much the same as the electrical trailing log: a rotating impeller sends a stream of electrical impulses to a display unit mounted in the cockpit or near the chart table.

The impeller - which can be either a miniature version of the trailing log's spinner, or a paddle wheel an inch or so in diameter - is mounted in a fitting called a transducer, which either protrudes through the bottom of the boat or hangs down below the transom.

The disadvantages of this system are that an impeller so close to the hull can be affected by the water flow around the hull itself, and that it is difficult and potentially dangerous to withdraw the transducer to clear weed or debris from it at sea. The reason in-hull logs are so popular is primarily the convenience of not having to stream and recover 30 feet or more of log line at the beginning and end of each passage.

Other logs

At the top of the scale of price and sophistication are several alternative methods of measuring speed through the water:

Electromagnetic logs are based on the same principle as generators and electric motors: that electricity is created if you move a magnetic field past an electrical conductor. In this case the conductor is sea water and the magnetic field is created by the transducer. As the transducer moves through the water a small electric current is set up, measured by sensors on the transducer.

Sonic logs use accurate measurements of the speed of sound between two transducers mounted one ahead of the other. Each transducer emits a continuous stream of clicks, inaudible to the human ear, while listening for clicks transmitted from the other. When the boat is moving, the movement of the water past the hull slows down the clicks travelling forward whilst speeding up those travelling aft. The instrument accurately measures the time taken for each click to make the trip, compares them, converts the results into a display of speed through the water, and from this calculates the distance run.

Another type of sonic log uses sophisticated echo sounder technology to measure the rate at which plankton and debris are moving past its transducer.

The big advantages of all three types are that they are much less susceptible to fouling than ordinary in-hull logs and that they can go on working at very high speeds or in rough sea conditions, when turbulence or air bubbles make impeller logs unreliable.

Calibrating logs

No log can be relied upon to be 100 per cent accurate. This is particularly true of hull mounted logs because - quite apart from any inherent inaccuracies in the instrument itself - the gradual build-up of fouling as the season progresses means that the boat is dragging an ever-thickening layer of water along with it, so the water flow past the impeller will be slower than the boat speed through the water. Conversely, around some parts of the hull, such as alongside a sailing boat's keel or near the propellers of a motor boat, the water flow may actually be accelerated, making the log over-read.

Errors can always be allowed for if you know about them, and most electronic logs have a calibration facility that allows them to be adjusted to take account of these variations. Finding, and if necessary, correcting, log error is known as calibration. In principle it involves measuring the time taken to cover a known distance, using this to calculate true speed, and comparing this with the speed indicated by the log. Any accurately-known distance can be used, though the best are undoubtedly the measured distances' set up specially for the purpose. They consist of two (or sometimes three) pairs of transit posts, marking the start and finish of a precisely-measured distance, and shown on the appropriate chart. The course to steer to cover the Measured distance is also shown.

Settle the boat on course and at a steady speed before crossing the first transit line; note the time at which you cross the start ine and hold that course and speed without making any allowance for wind or tide until you cross the finish line, and note the time taken. Note the actual log reading at intervals of, say, 15 seconds so that you can work out the average log speed for the whole run.

As perfectly still water is rare, it is important to repeat the process in the opposite direction. Having found the speed over the ground in both directions, the speed through the water can be calculated by taking the average, by adding the two speeds together and dividing by two.

A more accurate result can be obtained by making four or six runs, but this can be a very
time-consuming process, especially as log errors are not necessarily the same at all speeds, so the calibration runs need to be carried out at a range of different speeds, and repeated as a double check after the log has been adjusted.

A common mistake is to work out the average time taken and divide the distance by this. The result invariably understates the boat's speed, because it must have been travelling in the 'slow' direction longer than in the 'fast' direction.

Some large scale charts (harbour plans) have a clearly marked scale of distance - rather like the one you might find on a road atlas - usually printed somewhere near the bottom edge. But this is not always the case, and on the smaller scale charts used for coastal and offshore navigation it would be impractical to provide such a scale because the scale of the chart varies slightly from top to bottom. One sea mile, however, is by definition one minute of latitude, so the latitude scales on each side of the chart constitute a scale of distance.

The slight difference between a sea mile and an international nautical mile is so small that for normal navigation it can be ignored: what is important, on small scale charts, is the distortion caused by the Mercator projection, which means that distance has to be measured at the latitude at which it is to be used. The longitude scale on the top and bottom edges of the chart is useless as a scale of distance.

It is relatively rare to find ourselves faced with the job of measuring distance in an exactly north-south line, so we need some means of transferring the distance between any two points on the chart to the latitude scale. Dividers are the tool for the job. For classroom navigation the kind of dividers used in technical drawing are perfectly adequate, and their sharp needle points give a reassuring sense of precision, but for practical navigation, traditional bow dividers have the big advantage that they can be opened and closed with one hand, by squeezing the bow to open them, and squeezing the legs to close them.

Sometimes it is necessary to draw arcs of measured radius on the chart, for which it is useful to have a drawing compass. Again, the type intended for technical drawing can be used so long as it is big enough, but it is generally better to use the larger and less sophisticated versions intended for marine navigation.

Compasses and Measuring direction at sea

Direction at sea is measured using a compass - essentially an instrument which points north, and goes on pointing north regardless of the movement of the boat around it. In practice most yachts carry at least two compasses. One, steering compasses are relatively large, fixed to the boat, and used to measure heading. The other is usually smaller, portable and is used to measure the direction of distant objects, so it is called a hand bearing compass. Sometimes one compass can do both jobs: on many ships and a few large yachts an attachment called a pelorus allows the steering compass to be used for taking bearings, while on very small craft, a hand bearing compass clipped into a bracket can serve as a steering compass.

There are many ways of making an instrument that will stay pointing in one Direction, including gyroscopes, and what are called 'ring laser gyros', but although these have their advantages, they are much too sophisticated, and therefore expensive, to be of practical interest for yachts. The Overwhelming majority of yacht compasses Depend on magnetism, and in that respect can be seen as direct developments from instruments that were probably in use several thousand years ago. Compasses make use of the fact that the earth has a magnetic field, which is very much as though a huge bar magnet were embedded in its core and aligned with its North-South axis.

Any magnet that is free to swing tends to line itself up with the earth's magnetic field. This effect is particularly obvious in the small, flat compasses used for orienteering and rambling on land, in which a single straight needle-like magnet gives a direct Indication of north. In marine compasses, several such magnets, or a single magnet in the shape of a ring, are mounted underneath a circular 'card', with a scale of degrees or compass points marked on it. The whole thing is suspended in a bowl filled with a mixture of water and alcohol, which slows Down the movement of the card, to reduce the swinging that would otherwise be caused by the pitching and rolling of the boat.

Compasses intended for fast motor boats are much more heavily damped than those intended for sailing craft; the rapid slamming of a planing boat can be enough to make the card of a sailboat compass rotate continuously.

Steering compasses

On a steering compass the fore-and-aft line of the boat is marked by a line or pointer on the compass bowl, called the lubber line, against which the boat's current heading can be read from the card, so it is obviously important for the compass to be installed so that the lubber line is accurately aligned with, or parallel to, the centre line of the boat. Many compasses have supplementary lubber lines offset by 45° and 90° on each side, intended mainly for use in situations such as tiller-steered boats where the helmsman is likely to be looking at the compass from one side or the other.

Of course, there are variations intended to suit particular applications. On many small and medium sized sailing yachts, where cockpit space is at a premium, the compass is set into the aft bulkhead of the superstructure, so that the rear edge of the card is visible, rather than its upper surface. A compass intended for this type of mounting has an aft lubber line and a scale of degrees marked on the down-turned rim of the card. An even more extreme variation is occasionally found in compasses intended for steel craft, whose structure effectively masks the compass from the earth's magnetic field. This problem can be reduced by mounting the compass as high above the hull as possible, so compasses have been produced that can be mounted on the wheelhouse roof, with mirrors or prisms arranged so that the helmsman effectively looks upwards at the bottom of the compass card.

Grid compasses

Grid compasses, intended primarily for aircraft navigation, enjoyed a surge of popularity after the Second World War, when many boats were fitted out from Army surplus stores! The claim that they were easier to steer by maintained their popularity for at least 20 years and several marinized versions were produced. A grid compass has a card with a particularly prominent north set in a flat-topped bowl. On top of the bowl is a transparent cover, marked with a grid of parallel lines and with a scale of degrees es around its edge. The required course is set by rotating the cover, and the helmsman then steers so as to keep the --. mark on the card lined up with the grid.

Hand bearing compasses

A hand bearing compass is basically a small, portable version of a steering compass, fitted with some form of sighting arrangement that allows it to be accurately lined up on a distant object. They can be subdivided into two groups: those intended to be used at arm's length, which are usually fitted with a handle; and those intended to be held close to the eye, which are usually supplied with a neck strap. Which kind is best is very much a matter of personal preference, but anyone who uses spectacles or a hearing aid is well advised to go for an arm's-length compass because even small pieces of ferrous metal such as the hinges of spectacles can cause compass errors if they are only inches away.

Sighting arrangements vary. The classic Sestrel Radiant, for instance, has a prism mounted above the bowl, with a V-shaped notch on top. When the compass is held up at arm's length and eye level the lubber line and compass card can be seen in the prism. To take a bearing of a distant object, you line up the 'target' with the notch, rotate the compass until the lubber line appears in the prism immediately below the target, and then read off the bearing. Another common arrangement has two sights on top of the bowl, like the fore sight and back sight of a gun, and an edge-reading compass card. Close-to-the-eye compasses do not have such obvious sighting arrangements: instead they have a small prism mounted on top, whose optics are arranged in such a way that when you look at a landmark across the top of the compass, its bearing appears in the prism immediately below.

Fluxgate compasses

A new type of compass is rapidly gaining in popularity. Unlike a conventional 'swinging card' compass, a fluxgate compass has no moving parts, but instead uses electronics to detect the earth's magnetic field and present that information on some kind of display. A fluxgate depends on the phenomenon of electromagnetic induction - as used in transformers and the ignition coil of a petrol engine. If you pass an electric current through a coil of wire wound around a suitable metal core, the core becomes a magnet. Which end is the north pole, and which the south, depends on the direction of the current flow in the wire, so if you apply an alternating current to the wire, the north and south poles of the core change places each time the current reverses. If you have a second coil of wire wound around this whole assembly the constantly-reversing magnetic field induces an electric current in the secondary winding.

In a fluxgate there are two cores side by side, with their primary windings receiving alternating current from the same source, but wound in opposite directions. This means that in a magnetically 'clean' environment (with no external magnetic influences) the induced magnetism in the two cores would be equal and opposite, so they would cancel each other out and produce no current at all in the secondary winding that surrounds both of them. The presence of an external magnetic field upsets the balance, causing a short surge of electricity in the secondary winding each time the primary current reverses. This effect is most pronounced if the two cores are parallel to the external magnetic field. In a practical fluxgate compass, several fluxgates are arranged in a circle. By comparing the voltages induced in the various secondary windings it is possible to deduce where north is relative to the ring of flux-gates.

At present, the most common use of this technology is to provide heading information for other electronic equipment such as autopilots or radars, but it can also be used to provide a steering display for the helmsman or as the heart of an electronic hand bearing compass. Apart from the ease with which fluxgate compasses can be connected to other navigational electronics, their big advantages are that they can be fitted with an automatic correction facility, and that because the sensor and display are usually separate from each other, the sensor can be mounted anywhere on board and well away from distorting magnetic Influences. Fluxgate hand bearing compasses also have the facility to 'store' headings, to save the navigator having to memorize them.

Their main disadvantage is that very large errors can occur if the fluxgate ring is not kept perfectly horizontal. There are electronic solutions to this problem, but the fact remains that the compass without moving parts actually requires more sophisticated gimbal arrangements than its swinging card counterparts.


Impeller Logs and Compasses

Catalog Cybex Exercise Bike Shopping Elliptical Trainer Horizon Zodiac Chlorinators Immediately

Sunday, November 20, 2011

LRG3095S Large Capacity Free Standing Gas Range with 5 Sealed Burners 17 000 BTU SuperBoil Burner

!: expert reviews LRG3095S Large Capacity Free Standing Gas Range with 5 Sealed Burners 17 000 BTU SuperBoil Burner sale off

Brand : LG | Rate : | Price :
Post Date : Nov 21, 2011 05:42:01 | N/A

Meet a sleek smart expansive range that opens up the possibilities in your kitchen and makes it more beautiful at the same time It has the large capacity for big ambitious meals along with powerful burners and innovative features that give you all yo...

Uniden Bc95xlt Compare

Wednesday, November 16, 2011

Homes For Sale Mukilteo WA $730000 3153-SqFt 3-Bdrms 2.50-Baths on 0.28 Acres

Low Cost Sump Pump Water Backup Bunk Bed Side Rails

Monday, November 14, 2011

The 5 Best Cell Phones on the Market

!: The 5 Best Cell Phones on the Market

There are literally hundreds of cell phones out there made by dozens of manufacturers. It is hard to determine which are the best of the group - or at least, which is best for you. The decision is a difficult one, and we hope the information below will help you make a wise choice. The five cell phones listed below are truely the best of the best in terms of quality design, dependability, and overall user satisfaction. Although there are a lot of great cell phones out there, we are sure that these are some of the very best.

Motorola i860 Video and Camera Mobile Phone

Manufacturers Description: The sleek Motorola i860 is packed with more than a dozen top-of-the-line features including 10-second video capture and playback and a 0.3-megapixel camera with 4X digital zoom. In addition, it allows users to easily exchange digital photos and contact information with others.

”The Motorola i860 handset is another example of how Motorola strives to meet our customers’ needs by offering one mobile device to streamline communications," said Rey More, senior vice president and general manager, Motorola’s iDEN® Subscriber Group. “Its multimedia services enable users to easily capture the moment when it happens and share it with others, wherever they may be.”

The phone’s 10-second video capture capability includes a short-range LED spotlight to provide additional light for close-up pictures. The camera allows users to take pictures in a variety of sizes suitable for sharing, in-camera viewing, wallpaper designs, and picture caller ID. Users can get themselves in the picture using the self-timer.

With the Motorola i860, users can share their pictures and audio recordings by sending and receiving multimedia messages.1 The phone’s integrated Media Center allows users to conveniently manage all pictures, voice recordings, ring tones, videos, and wallpaper designs from a single area.

Other features of the Motorola i860 that are new to iDEN handsets include:

Picture Caller ID - allows a previously-assigned picture of a caller to appear in the external display when a phone call is incoming from that contact

Larger external color screen - displays up to 3 lines of text and pictures

Larger internal color screen - displays up to 11 lines of text in vibrant color

Push-to-Send My Info2 - allows users to send their contact information via the “push-to-talk” (PTT) button. Users can limit the amount of information sent or send a virtual business card to network more efficiently.

Push-to-Send Contacts2 - allows users to easily share another user’s contact information via the PTT button

Media Downloader application – available for download from the Internet, this free application allows users to transfer photos and videos from their phone to their PC via a USB cable (not included)

25 MB of memory available to end users - for ring tones, voice recordings, videos, pictures, messages, wallpaper designs, and Java™ applications

MP3 ring tones - including music and voice

Openwave 7.0 Internet microbrowser - lets users browse graphic-rich xHTML sites

Push-to-open button - offers convenient, one-handed operation of the flip-style phone by mechanically opening the flip when pressed

The phone also has many of the features associated with Motorola’s iDEN technology, including location-based services, integrated speakerphone, voice recorder3, voice dialing, downloadable applications, and a two-way radio for instant communication at the touch of a button.

The Motorola i860 handset weighs 4.77 ounces and measures 3.45 x 1.96 x 1.01 inches with the included high performance battery.

Overall Value Rating: 9.7 / 10 - Excellent

Price: 0 - 0

Nokia 6230 Cell Phone (Cingular)

Manufacturers Description: Offering the best and latest technology and features, the Nokia 6230 meets the requirements of the most demanding mobile phone users. The tri-band (GSM, GPRS, EDGE 900/1800/1900, GSM, GPRS, EDGE 850/1800/1900) mobile phone offers multiple connectivity options via EDGE and Bluetooth wireless technology, a removable multimedia memory card as well as an integrated VGA camera to capture pictures and videos. Sleek and compact, the Nokia 6230 is expected to start shipping in Europe, Africa, Asia Pacific and Americas in the first quarter of 2004.

"Traditionally, mobile professional are early adopters of mobile technology, demanding advanced functionality and higher data speeds to keep them informed, entertained and connected while on the move," said Kai Öistämö," Senior Vice President, Nokia Mobile Phones. "With EDGE, Bluetooth technology, an integrated camera, MMS functionality and even an integrated MP3 player, the Nokia 6230 addresses these needs with an impressive range of features to help balance a busy work schedule with after-work responsibilities."

One of the key benefits of the Nokia 6230 is a compelling multimedia experience. With an integrated VGA camera and a display with 65,000 colors, pictures and videos taken with the Nokia 6230 appear sharp and bright. The video player adds the ability to record, send and receive video clips with audio, as well as receive streaming video content in 3GPP video streaming format. High quality video and images, voice, presentations, files and music can be stored on a removable multimedia memory card. Users can also create, send and receive multpicture, multimedia messages with Synchronized Multimedia Integration Language (SMIL) technology. SMIL technology allows users to compose multi-image messages that display text, sound and images in a pre-determined order.

For flexible and efficient wireless connectivity, the Nokia 6230 phone offers Bluetooth wireless technology and infrared connectivity as well as HSCSD and GPRS support. Bluetooth enables a wide range of new exciting enhancements for seamless connections and comfortable wearability, like the Nokia 610 car kit phone and the stylish Wireless Boom Headset also announced today. The complete list of Bluetooth enhancements compatible with the Nokia 6230 can be viewed at [http://www.nokia.com/products/Nokia6230].

Using the high-speed packet-based EDGE connectivity of the Nokia 6230, business professionals can enjoy faster browsing, messaging and downloading. With a downlink data speed of up to 236.6 kbps, downloading with the Nokia 6230 via EDGE enables downloads more than 4 times faster than with GPRS.

In addition, the Nokia 6230 has a mobile email client that lets users manage their email quickly over EDGE, GPRS and HSCSD networks. The advanced xHTML browser gives fast access to mobile services and information, and the integrated TCP/IP technology** enhances both the ease and speed of over-the-air file downloads. Data synchronization capability allows users of the Nokia 6230 to update personal data remotely over the network. Local synchronization of personal data can also be done via Bluetooth, IrDa, USB and the Nokia PC Suite.

With the presence-enhanced contacts service, users of the Nokia 6230 can share their availability, intentions and whereabouts with colleagues, family, friends and other contacts. For example, a business professional can change his phone profile to 'Meeting' and advise his colleagues to reach him by SMS or MMS. Exchanging instant text messages is another interesting possibility with the presence-enhanced Chat function, where users of the Nokia 6230 can create their own private chats and invite others to participate, or even join public chats of their interest.

The Nokia 6230 also includes a digital music player for AAC/MP3 music formats. In addition to enjoying high quality stereo music, music enthusiasts can set their favourite music as wake-up tones as well as alert and ring tones.

Key features include:

Active TFT color display - with up to 65.536 colours

Integrated digital VGA camera

High speed packet-based EDGE and GPRS connectivity

Bluetooth

Digital camcorder and video player

Video streaming including AMR audio

MMC Multimedia card support

Java MIDP 2.0

Presence-enhanced contacts and chat

MP3/AAC music player and built-in FM stereo radio

xHTML browser for enhanced mobile browsing experience

Advanced PIM functionality (calendar, phonebook, to-do list, notes)

OMA Digital Rights Management version 1.0

Mobile Wallet

Integrated hands-free speaker

Polyphonic ring tones (supporting up to 24 instruments)

Infrared, USB, PC Suite

76 cc, weighs 97 grams

Talk time of up to 5 hours and a standby time of up to 300 hours.

Overall Value Rating: 9.6 / 10 - Excellent

Price: 0 - 0

Motorola A630 Cell Phone (T-Mobile)

Manufacturers Description: Following in the footsteps of the game-changing Motorola StarTAC and the company’s revolutionary two-way pagers, the model A630 is yet another innovative new product from Motorola. Packaged in a unique, multi- functional design featuring a QWERTY keyboard hidden inside a sleek candy bar form, the Motorola A630 lets you call, text or email with style and ease.

From the outside, you see a fashionable, compact mobile handset. Once opened, the device reveals a full QWERTY keyboard that makes texting, email exchanges and Instant Messaging easy. The A630 does not stop there. For multi-media fun, the handset comes with an integrated camera with 4 x zoom, multi-media messaging for sending and sharing images, dedicated gaming keys and a vivid color display that offers portrait as well as landscape views. When its time to be productive, the A630 offers integrated Bluetooth® wireless technology, an office quality speakerphone and email support including POP3, SMTP and Imap4. The Motorola A630’s fusion of the mobile and messaging worlds without sacrificing weight, size or style makes it the ideal device for today's text-savvy trendsetting consumer.

With the debut of the model A630, Motorola delivers a uniquely designed handset that stands apart from the pack, promising simplified voice and messaging communications supported by the latest technology,” said James Burke, Sr. Director of Product Operations for Motorola, Inc. “With its clever combination of fun and function, the model A630 is sure to please style-conscious movers and shakers."

The Motorola A630 features include:

Full QWERTY keyboard with 5-way navigation for easy messaging, fun gaming and more

Integrated VGA camera with dedicated photo button for quick shoot and send power

220 x 176 pixel color landscape display capable of supporting up to 65,000 colors

Built-in Bluetooth wireless technology

Advanced messaging including Multi-Media Messaging Service (MMS), SMS, e-mail support (POP3, SMTP, Imap4) and multibranded IM (Instant Messaging)

GSM tri-band capabilities

J2ME™ downloading functionality

Integrated hands-free speakerphone

Polyphonic speaker for the ultimate sound and cool MP3 ringtones

Overall Value Rating: 9.3 / 10 - Very Good

Price: 0 - 0

Samsung p735 Cell Phone (T-Mobile)

Manufacturers Description: Featuring a package of design and multimedia features, the imaginative p735 is Samsung's first GSM megapixel camera phone in the U.S. With options that entertain, enrich and enhance a consumer's wireless experience, the p735 boasts an eye-catching twist and flip display and advanced multimedia technology, including a megapixel camera phone, video recorder, MP3 player and expandable memory.

The phone's distinct feature is a swivel form factor that allows the consumer to twist the display so that the vibrant 262,000-color screen rotates to a horizontal position, giving the phone a more camcorder-like feel and making picture taking and video recording easier. And with a megapixel camera, film-quality pictures can be stored and printed at sizes up to 4x6.

For moments such as upcoming holiday gatherings that require more than a quick snapshot, the video recorder is practical and convenient, and video and pictures can be shared wirelessly via T-Mobile's messaging services. While the phone's 64MB of internal memory provides space for pictures and video, the p735 comes with an RS MMC media slot and additional 32MB multimedia card so no moment is ever missed. In addition, the expandable memory slot offers space for easy and quick access to supplementary applications and games.

For those that still have the gamer in them but are too busy to play at home, the p735 acts as a gaming device with access to 3D games, including Metalion and Zio Golf. For music download addicts, the p735 comes equipped with a personal MP3 player, so downloading, playing and sorting music wirelessly becomes a convenience, not a hassle. Sounds come in clear with T-Mobile's HiFi Ringers and the device's pre-packaged headset provides a heightened auditory experience.

The p735 will change the way consumers view their wireless phone” said Peter Skarzynski, senior vice president of Samsung's wireless division. Whether using the phone to download and listen to music, or snapping pictures and video clips to send back to the office while on a business trip, the p735 will enhance consumers' digital lifestyle.

This is a truly fun phone” said Todd Achilles, director of handset product management for T-Mobile USA. “From the bright screen, to cool swivel design, and MP3 player to the megapixel camera, there's a lot to keep you entertained”

Features:

Integrated MegaPixel Digital Camera - Take pictures on the go. Enjoy one megapixel pictures plus digital zoom, multishot, and more.
RS MMC Media Slot - Add memory, applications, and store photos with a memory card.

MP3 Player - Download, play and sort your favorite tunes to listen to on your phone.

262 TFT Main Color Display - Makes everything come to life on your phone including photos, picture caller ID, and more.
Video Messaging - Record up to 15 second clips with sound and send them to other compatible phones.

Overall Value Rating: 9.0 / 10 - Very Cool

Price: 0 - 0

LG VX4600 Cell Phone (Verizon Wireless)

Manufacturers Description: The attractive VX4600 is the perfect mobile phone for consumers who are looking to express themselves with high-end quality, style and essential functionality. Its ultra-cool clamshell design, high-resolution internal color display, and innovative external OEL (Organic Electro-Luminescent) screen make an undeniable statement of style.

Basic Information:

Talk time: 200 minutes Standby time: 165 hours Size: 3.43H x 1.81W x 0.98D inches Weight: 3.38 oz

Basic Features:

1.9 Ghz PCS, 800 MHz CDMA (All Digital)

Enhanced Messaging Service (EMS) to send and receive text messages with graphics and sound

E911 Emergency Location-capable

2.5mm headset jack to accept universal hands-free headsets

65K TFD Main Color Display (120 x 160) 8 lines of Text

OEL Sub Display (96 x 38) 3 lines of Text

Blue Backlit Keypad

5-Way Navigation Key

CMX MIDI (musical instrument and games digital interface) for sounds and ringers

Large Phone Book: 499 contacts (each stores 5 numbers and 3 email addresses)

36 Embedded Ring Tones and download more

Vibrate and Silent Modes

Voice-Activated Dialing

Speed Dialing (99 Entries)

Bilingual (English and Spanish) capabilities

Personal Organizer: Calendar with Scheduler, Alarm Clock, Voice Memo, Notepad, EZ Tip Calculator, Calculator and World Clock

External USB Capable

1-Year limited warranty

Meets FCC SAR limit. Manufacturer's highest FCC reported SAR 1.22 at ear, .74 on body. Actual SAR may vary.

Overall Value Rating: 8.8 / 10

Price: 0 - 0


The 5 Best Cell Phones on the Market

Solar Charge Battery Life Tips Munchkin Replacement Straws, 2 Pack by Munchkin

Thursday, November 10, 2011

What is the Difference Between Plasma TV, LCD TV and LED TV?

!: What is the Difference Between Plasma TV, LCD TV and LED TV?

Over the past decade home entertainment technology has really taken some huge leaps forward. Today, the task of buying a new TV is not just a matter of picking your favourite brand or buying the largest size you can afford. There seem to be more options than ever, and this has certainly led to a lot of confusion among consumers. With that in mind, what exactly are the main differences between the different types of TV, and which is the best?

Plasma TVs are one of the older types of flat screen. They are relatively cheap to produce meaning that prices are generally low for the screen size, which led to plasma becoming a popular choice with consumers who wanted to get the largest screen for their money. These TVs use a gas, which then turns into plasma when an electronic current is passed through it; the plasma then emits the light to create the pictures. This results in a high quality, realistic picture that doesn't suffer from motion blur. It also offers a particularly wide viewing angle.

However, plasma screens do tend to only have a lifespan of about 10-15 years and do use a relatively high amount of energy, which is now frowned upon as many consumers are trying to become more environmentally friendly. Plasma screens are also quite thick, and are very heavy for their size, so they can be awkward to move. The screen is also fairly susceptible to glare, especially in bright rooms.

LCD TVs can trace their roots back to computer monitors and were first introduced at around the same time as plasma TVs. These TVs use the same basic technology as your pocket calculator screen and are backlit with florescent light. They have a much longer lifespan than plasma screens, something in the region of 30+ years, and also use much less power. Traditionally LCD prices were higher than plasma, but as new manufacturing techniques have evolved the prices are now rapidly falling.

While LCD TVs are available in a wide range of sizes, they do offer the worst performance of all the flat screens though, not only do they have the lowest contrast level but they also have a slow refresh rate meaning that motion blur often occurs. The viewing angle is also much narrower than that of plasma TVs, which means that it can be difficult to find a location that offers a good view for everyone, especially in smaller rooms.

LED TVs are actually the next generation of LCD screens, as they are based on a similar technology but use LED backlighting instead of the florescent backlighting found in traditional LCD screens. The new backlighting technology means that they are able to deliver a much more dynamic picture quality, they also use significantly less power than even the most efficient LCD TVs. LED screens can be made to be extremely thin, so they offer consumers the ability to place the TV practically anywhere - indeed it is now commonplace to see TVs fastened to the wall in order to save floor space.

As this is still a relatively new development, LED screens do tend to be more expensive than their LCD counterparts. However as LED TVs become more widespread the cost of production is expected to drop significantly, which will be reflected through dramatically lower prices in-store. Having said that, LED technology is considered to be the most reliable of all the flat screen formats so many people don't mind paying a little bit more.

The world of home entertainment can certainly be a confusing place, especially as new advances in technology seem to come along on an almost monthly basis. Hopefully this article has shed some light on the current generation of flat screen TVs, so at least you can stand a fighting chance the next time you venture into the home entertainment section of the electronics store.


What is the Difference Between Plasma TV, LCD TV and LED TV?

Knitting Ponchos Frye Harness Boots Women Buy Online

Monday, November 7, 2011

30" Freestanding Gas Range with 5 Sealed Burners 2.2 cu. ft. Upper Oven Self-Clean Automatic Shut-Off 3.9 cu. ft. Lower Oven and WideView Window Smooth Black

!: expert reviews 30" Freestanding Gas Range with 5 Sealed Burners 2.2 cu. ft. Upper Oven Self-Clean Automatic Shut-Off 3.9 cu. ft. Lower Oven and WideView Window Smooth Black purchase online

Brand : LG
Rate :
Price : $1,160.39
Post Date : Nov 07, 2011 20:24:05
Usually ships in 1-2 business days



LG Electronics pursues its 21st century vision of becoming a true global digital leader who can make its customers worldwide happy through its innovative digital products and services LG Electronics set its mid- and long-term vision anew to rank amon...

Shop Star Trek Collectibles 18 Doll Bunk Bed


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。